View 53250_435542.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

53250
RADIATION TOLERANT 40VDC - 10A SOLID STATE RELAY
Mii
HYBRID MICROELECTRONICS PRODUCTS DIVISION
Features:
Applications:
* * * * * * * *
This Design Tested to 100 krad (Si) Total Dose Hermetically Sealed in Surface Mount Package Low On-resistance 10A Continuous Output Current Performance over -55C to +125C Optically Coupled Input/Output Isolation Tested to 1000 VDC Shock and Vibration Resistant
* * * * * *
Satellite/Space Systems Military/High Reliability Systems Power Distribution/Switching Solenoid Driver Stepper Motor Driver Switching Heaters
DESCRIPTION
The 53250 is a SPST, radiation tolerant, DC solid state relay (SSR) designed for military and space applications. This light-weight device is resistant to damage from severe shock and vibration, and is immune to contact related problems inherent in electro-mechanical relays. The SSR is enclosed in a hermetic metal package to ensure reliability in harsh environments. Effective isolation of 1000 VDC between control and load circuits is achieved through the use of optical coupling. Functionally, the device operates as a single-pole single-throw, normally open (1 Form A) DC solid-state relay. The SSR is actuated by an input current of 5 to 15 mA, which can be supplied from standard logic types such as opencollector TTL. Output is provided by a power MOSFET exhibiting very low RDS(ON) and capable of carrying a continuous current of 10 amperes. This design has demonstrated it will function with minimal degradation after exposure to 100 krad (Si) total dose. This device is available in a variety of quality levels from COTS to class K including any custom screening requirements. The basic data sheet part is environmentally screened to H level in accordance with Table C-IX of MIL-PRF-38534.
ABSOLUTE MAXIMUM RATINGS Output Voltage ....................................................................................................................................................... 50 VDC Continuous Output current ..........................................................................................................................................10 A Peak Output Current (1) ........................................................................................................................................ 22 A Storage Temperature Range .................................................................................................................. -65C to +150C Operating Junction Temperature............................................................................................................ -55C to +150C Lead Solder Temperature for 10 seconds .............................................................................................................. 300C Continuous Input Current .........................................................................................................................................20 mA Peak Input Current (2) ............................................................................................................................................ 100 mA Reverse Input Voltage ............................................................................................................................................. 6 VDC Power Dissipation (3) ...................................................................................................................................................25 W Linear Derating Factor......................................................................................................................................... 0.2 W/C WEIGHT: ........................................................................................................................................4.2 grams (typical)
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
1
53250 Radiation Tolerant 40VDC - 10A Solid State Relay RECOMMENDED OPERATING CONDITIONS: Parameter Output Voltage Continuous Output Current Input Current (on) Input Voltage (off) Operating Case Temperature ELECTRICAL SPECIFICATIONS (Pre-Irradiation) TC= -55C to +125C unless otherwise specified Parameter
Output On-Resistance Output Leakage Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Leakage Turn-On Time Turn-Off time Rise Time Fall Time Thermal Resistance (junction-case) Output Off-Capacitance Input Capacitance Input-Output Capacitance * All typical values are at TC = 25C
Symbol VO (OFF) IO (ON) IF (ON) VF (OFF) TC
Min.
Max. 40 10
Units VDC A mA VDC C
5 0 -55
15 1 125
Sym.
R (ON) IO (OFF) VF VR II-O tON tOFF tR tF JC CO (OFF) CIN CI-O
Min.
3.10 6
Typ.*
0.032 <1 3.75 40 3.3 0.35 2.5 0.19 4 1.8 27 2.6
Max.
0.060 250 4.20 1 8.0 2 6.0 1.0
Units
A VDC VDC A ms ms ms ms C/W nF pF pF
Test Conditions
IF = 15 mA IO = 1 A VF = 1 VDC VO = 50 VDC IF = 15 mA IR = 10 A RH 45%, t = 5 s VI-O = 1000 VDC TC = 25C IF = 15 mA IO = 10 A V load = 40 VDC Pulse width = 10 ms Duty cycle 1%
Notes
4, 5 Figures 3, 4 Figures 3, 5 6, Figure 3
VO = 28 VDC f = 1 MHz VF = 0 V f = 1 MHz VI-O = 0 V f = 1 MHz 4
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
2
53250 Radiation Tolerant 40VDC - 10A Solid State Relay
Notes: 1. 2. 3. 4. 5. 6. Non-repetitive, pulse width 10ms, TC = 25C (see Figure 6). Non-repetitive, pulse width 100s, TC = 25C. Case Temperature TC = 25C (see Figure 7). Input pins shorted together and output pins shorted together. Input-output potential applied momentarily, not an operating condition. Rise time is measured from 10% to 90% of load current (90% to 10% of VO). Fall time is measured from 90% to 10% of load current (10% to 90% of VO). CAUTION: Care should be taken so as not to exceed the maximum power dissipation and maximum junction temperature when repetitively switching loads.
INPUT ON OFF OUTPUT ON OFF
Figure 1. Truth Table
Figure 1. Terminal Connections
+V C RS
+DC SUPPLY R LOAD
1
4
2 -V C
3
TOP VIEW
OUTPUT GND
Figure 2. Terminal Connections
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
3
53250 Radiation Tolerant 40VDC - 10A Solid State Relay
ZO = 50 t R = t F = 10ns PULSE GENERATOR V LOAD = 40 V
RL = 4 1 4 VO MONITOR
CL= 25 pF
(INCLUDES PROBE AND FIXTURE CAPACITANCE)
I F MONITOR (100mV/mA)
2 100
3
50% IF
50%
VO 10%
90%
t ON
t OFF
Figure 3. Switching Waveforms and Test Circuits
30
Turn-on Time (ms) Turn-off Time (ms) 15mA
1 0.8 0.6 0.4 0.2 0 -55 -25 5 35 65 95 125 -55 -25 5 35 65 95 125
Temperature (C) Temperature (C)
25 20 15 10 5 0
5mA 10mA
Figure 4. Turn-on Time vs. Case Temperature for Different Values of IF (typical data).
Figure 5. Turn-off Time vs. Case Temperature with IF = 5 to 15 mA (typical data).
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
4
53250 Radiation Tolerant 40VDC - 10A Solid State Relay
25 20 15 10 5 0
-55 -25 5 35 65 95 125
Temperature (C) Maximum Average Power Dissipation (W) Maximum Peak Output Current (A)
50 40 30 20 10 0 -55 -25 5 35 65 95 125
Temperature (C)
Figure 6. Maximum Non-repetitive Output Current vs. Case Temperature (pulse width 10 ms).
Figure 7. Maximum Average Output Power Dissipation vs. Case Temperature.
TOTAL DOSE TEST RESULTS Disclaimer: The data of 4 representative units irradiated in Cobalt-60 chamber is only typical of one lot of solid state relays. Micropac does not guarantee performance of its SSR to these radiation levels. Individual lots have to be screened to guarantee the performance.
5 Turn-On Time, ms 4 3 2 1 0 0 50 Total Dose, krad (Si) 100 Rise Time, ms
5 4 3 2 1 0 0 50 Total Dose, krad (Si) 100
Figure 8. Turn-On Time vs Total Dose at Vout = 20 V, Rload = 4 , Iin = 15 mA, 10% duty cycle.
Figure 9. Rise Time vs Total Dose at Vout = 20 V, Rload = 4 , Iin = 15 mA, 10% duty cycle.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
5
53250 Radiation Tolerant 40VDC - 10A Solid State Relay
1.0 Turn-Off Time, ms
1.0
Fall Time, ms
0.5
0.5
0.0 0 50 Total Dose, krad (Si) 100
0.0 0 50 Total Dose, krad (Si) 100
Figure 10. Turn-Off Time vs Total Dose at Vout = 20 V, Rload = 4 , Iin = 15 mA, 10% duty cycle.
Figure 11. Fall Time vs Total Dose at Vout = 20 V, Rload = 4 , Iin = 15 mA, 10% duty cycle.
0.04 Output Leakage Current, nA 0 50 Total Dose, krad (Si) 100 On-Resistance, ohm
80 60 40 20 0 0 50 Total Dose, krad (Si) 100
0.03
0.02
Figure 12. On-Resistance vs Total Dose at IF = 10 mA, Iout = 100 mA for 1s.
Figure 13. Output Leakage Current vs Total Dose at VF = 1 V, Vout = 50 V.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
6
53250 Radiation Tolerant 40VDC - 10A Solid State Relay
4.0 3.9 3.8 3.7 3.6 3.5 0 50 Total Dose, krad (Si) 100 80
Input Forward Voltage, VDC
Input Reverse Voltage, VDC
60
40
20 0 50 Total Dose, krad (Si) 100
Figure 14. Input Forward Voltage vs Total Dose at IF = 15 mA.
Figure 15. Input Reverse Voltage vs Total Dose at IR = 10 A.
CASE OUTLINE
.750 .600
1
4
.150
.500
.094
2
3
.100 .040
1.060 .030 .185 O.081 (4X) .500 .025 MAX .025 .002 DIA (4 PLCS)
.095 REF .060 .030
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 01/18/02
7

▲Up To Search▲

Price & Availability of 53250

	To Download 53250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .